6 Port Fuel Gas Dual Tank Selector Valve Chevy Dodge Ford GMC Pickup Truck U7001 for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $72.00


Universal Brand SMP


6 port motor driven; O.E.M. #12336291, U7001.

  • Fuel tank selector Valve controls which tank is supplying the engine with fuel
  • When not replaced, engine may run out of fuel and/or cause fuel pump damage
  • Designed to meet or exceed OE specifications in form, fit and function
  • Global coverage for import and/or domestic applications
  • INSTRUCTIONS

  • Fuel Selector Valve Installation Instruction Carefully read the following instructions to become familiar with the procedures on this sheet.
  • GENERAL INFORMATION The fuel selector valve was designed to operate in vehicles with a 12 VDC electrical system that have one main and one auxiliary fuel tank and fuel return lines. The valve can operate in gasoline or diesel fuel systems between temperatures of –40°F and +175°F. IMPORTANT: Maximum operating pressure is 60 PSI. Not for use in fuel systems operating over 60 PSI. CAUTION: To reduce the risk of fire and personal injury, it is necessary to relieve the fuel system pressure before servicing fuel system components. Refer to your vehicle Service Manual for proper procedure.
  • PREPARATION FOR INSTALLATION Obtain appropriate hardware to perform the job. • Electrical wires — must be 18 gauge or heavier. • A six-way wire connector harness for a conversion or new replacement. • Fuel supply hoses — must be 3/8\" I.D. gasoline or diesel approved. • Fuel return hoses — must be 5/16\" I.D. gasoline or diesel approved. • Two proper length 5/16 – 18 thread selector valve mounting bolts. • A rocker switch. Use this switch to replace the original rocker type. On conversions or new replacement modification of dash may be necessary. (Type ‘B’ on diagram) • Face plate for universal applications. • Proper size “worm” style fuel hose clamps.
  • INSTALLATION Drain Main Fuel Tank Select the best location for the selector valve. It should be near fuel lines, away from heat, splash and moving parts. On applications with a single external fuel pump, install the valve between the fuel tanks and the pump as illustrated. Using the two bolts, mount the valve on the frame or other firm surface with the four ports toward the fuel tanks. Warning: Fuel spillage may occur. Place a container and shop towel when disconnecting fuel lines to collect the fuel. DO NOT smoke. Extinguish any open flame (including pilot lights) before commencing job. Fuel Hose Connections: 1. After the auxiliary fuel tank is installed, route the fuel supply and return hoses to the selector valve. (See illustration). Be sure to install a good quality fuel filter in each supply line. Make sure all connections of hoses are properly secure and tighten hose clamps. 2. On vehicles with in-tank fuel pump, disconnect fuel supply hose from existing fuel filter outlet (engine side) and install onto valve. Add a new hose from selector valve to filter as necessary. Disconnect return fuel hose from main tank and install onto valve. Add a new hose from selector valve to tank as necessary. Make sure all connections of hoses are properly secure and tighten hose clamps. 3. On vehicles with an external fuel pump, connect pump inlet hose to selector valve as shown. Connect return fuel hose as in step 2. IMPORTANT NOTE: Be sure fuel hoses are not bent and fuel flow is not restricted. If necessary, use brackets to support fuel hoses. Electrical Connections: 1. Disconnect negative battery cable. 2. Prepare the six-way connector as follows: • Slide the large green seal to position if not already in place. • Insert cavity plug into opening “F”. • Insert five lead assemblies into opening “A-E”. Make sure terminal snaps into place and small green seal is completely inside each cavity. Fold up black bracket until it locks and hold wires in place. Insert the six-way connector into valve until it locks in place. 3. Select a location on the dashboard and install the switch (and face plate for toggle switch application). 4. If using a toggle switch, cross wire as shown. Connect one pair of terminals to a good ground and the other pair to a +12 VDC source (such as Accessory Terminal of fuse box) through a 10 amp. fuse. Connect the middle terminals on the switch to the sixway connector as shown. 5. Cut the existing electrical wire from the main tank sending unit to the fuel gauge in a convenient spot, and connect both wire ends to the six-way connector as shown in illustration. NOTE: Make sure to single out the correct wire (before cutting), if it’s connected to a main harness. Refer to the vehicle wiring diagram. 6. Connect the new sending unit wire from the auxiliary tank to the six-way connector as shown. 7. Connect the main and auxiliary fuel pumps as shown in illustration. (Applications with a single external fuel pump, do not require any change to the wiring connection.) IMPORTANT NOTE: All electrical connections and splices must be secure, insulated, and sealed to prevent corrosion and malfunction. Selector Valve Operation: In the first switch position the fuel will flow and return to the main tank. In the second switch position the fuel will flow and return to the auxiliary tank. Before operating the new system, double check all electrical and fuel connections. Add a small amount of fuel to each tank, connect negative battery cable and start the engine. Operate the switch to ensure that the valve is operating correctly. Recheck fuel hose connections and fix any leak immediately. To test the system, add a different (known) amount of fuel to each tank. With engine running, operate the switch and observe the fuel gauge for proper fuel level indication of each tank. Correct readings indicate proper function of fuel gauge.
  • Universal style
    • 6 Total ports
  • Replaces dealer part number: 12336291, U7001
  • Built to strict quality control standards
  • Replaces any selector valve that is rusted or damaged from an accident
  • Mounting instructions included

Brand NEW fitting for the following years and models:


  • 1974-85 Chevy C10 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 Chevy C1500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 Chevy C20 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 Chevy C2500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 Chevy C30 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 Chevy C3500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 Chevy K10 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 Chevy K1500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 Chevy K20 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 Chevy K2500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 Chevy K30 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 Chevy K3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987 Chevy R1500 Truck Fuel Tank Selector Valve 6 Port
  • 1987 Chevy R1500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy R2500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy R2500 Truck Fuel Tank Selector Valve 6 Port
  • 1989 Chevy R2500 Truck Fuel Tank Selector Valve 6 Port
  • 1989-91 Chevy R3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy R3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy R3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987 Chevy V1500 Truck Fuel Tank Selector Valve 6 Port
  • 1987 Chevy V1500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy V2500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy V2500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy V3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 Chevy V3500 Truck Fuel Tank Selector Valve 6 Port
  • 1989-91 Chevy V3500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-89 Dodge D100 Truck Fuel Tank Selector Valve 6 Port
  • 1977-93 Dodge D150 Truck Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge D200 Truck Fuel Tank Selector Valve 6 Port
  • 1981-93 Dodge D250 Truck Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge D300 Truck Fuel Tank Selector Valve 6 Port
  • 1981-93 Dodge D350 Truck Fuel Tank Selector Valve 6 Port
  • 1978-81 Dodge D400 Truck Fuel Tank Selector Valve 6 Port
  • 1978-81 Dodge D450 Truck Fuel Tank Selector Valve 6 Port
  • 1981-94 Dodge Van B350 Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge Van B300 Fuel Tank Selector Valve 6 Port
  • 1981-94 Dodge Van B250 Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge Van B200 Fuel Tank Selector Valve 6 Port
  • 1981-94 Dodge Van B150 Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge Van B100 Fuel Tank Selector Valve 6 Port
  • 1974-89 Dodge W100 Truck Fuel Tank Selector Valve 6 Port
  • 1977-93 Dodge W150 Truck Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge W200 Truck Fuel Tank Selector Valve 6 Port
  • 1981-93 Dodge W250 Truck Fuel Tank Selector Valve 6 Port
  • 1974-80 Dodge W300 Truck Fuel Tank Selector Valve 6 Port
  • 1981-93 Dodge W350 Truck Fuel Tank Selector Valve 6 Port
  • 1974-83 Ford E100 Van Fuel Tank Selector Valve 6 Port
  • 1975-94 Ford E150 Van Fuel Tank Selector Valve 6 Port
  • 1974 Ford E200 Van Fuel Tank Selector Valve 6 Port
  • 1975-94 Ford E250 Van Fuel Tank Selector Valve 6 Port
  • 1974 Ford E300 Van Fuel Tank Selector Valve 6 Port
  • 1975-94 Ford E350 Van Fuel Tank Selector Valve 6 Port
  • 1974-83 Ford F100 Truck Fuel Tank Selector Valve 6 Port
  • 1975-94 Ford F150 Truck Fuel Tank Selector Valve 6 Port
  • 1974-94 Ford F250 Truck Fuel Tank Selector Valve 6 Port
  • 1974-94 Ford F350 Truck Fuel Tank Selector Valve 6 Port
  • 1990-94 Ford F450 Truck Fuel Tank Selector Valve 6 Port
  • 1989-94 Ford F53 Fuel Tank Selector Valve 6 Port
  • 1989-94 Ford F59 Fuel Tank Selector Valve 6 Port
  • 1974 Ford M-450 Fuel Tank Selector Valve 6 Port
  • 1974-76 Ford Van - P Series Forward Control P350 Fuel Tank Selector Valve 6 Port
  • 1974-85 GMC C1500 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 GMC C1500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 GMC C2500 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 GMC C2500 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 GMC C3500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 GMC C3500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 GMC K1500 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 GMC K1500 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 GMC K2500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 GMC K2500 Truck Fuel Tank Selector Valve 6 Port
  • 1974-85 GMC K3500 Truck Fuel Tank Selector Valve 6 Port
  • 1988-95 GMC K3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987 GMC R1500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 GMC R2500 Truck Fuel Tank Selector Valve 6 Port
  • 1989-91 GMC R3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 GMC R3500 Truck Fuel Tank Selector Valve 6 Port
  • 1987 GMC V1500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 GMC V2500 Truck Fuel Tank Selector Valve 6 Port
  • 1987-88 GMC V3500 Truck Fuel Tank Selector Valve 6 Port
  • 1989-91 GMC V3500 Truck Fuel Tank Selector Valve 6 Port


ACDELCO GM ORIGINAL EQUIPMENT 14029228 ACDELCO GM ORIGINAL EQUIPMENT CANADA 14029228 AIRTEX AUTOMOTIVE DIVISION 8F1312 BWD AUTOMOTIVE FSV3 CARQUEST 541701 CARQUEST/STANDARD MOTOR PRODS. 541701 CARQUEST/STANDARD MOTOR PRODS. FV5 CARQUEST/WELLS 541701 ECHLIN 22198 FEDERATED IGNITION FSV3 GP SORENSEN FSV2 KEMPARTS FTV2 NAPA 22198 NAPA 32198 NAPA/ECHLIN FUEL SYSTEM-CRB 22198 NAPA/MILEAGE PLUS FUEL-MPF 32198 NIEHOFF UN52 POLLAK 42149 POLLAK 42203 SIERRA MARINE FSV2 WELLS 541701 WELLS FSV2


Parts Search:


Follow