When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $59.99
WHEEL ADAPTERS (Changes Bolt Pattern) - Vehicle Must Be 5x114.3 or 5x4.5 AND Wheels Must Be 5x100.Item Specifications:
Thickness: 1.0" (25mm)
Vehicle Side Bolt Pattern: 5x114.3 or 5x4.5
Wheel Side Bolt Pattern: 5x100
Centerbore: 73.1mm
Stud/Nut Thread Pitch: 12x1.5
Material: T6 Aerospace Grade Aluminum
Compatible With::
Verify your Vehicle Bolt Pattern and Wheel Bolt Pattern match the specifications listed above. Also check your Vehicle's Centerbore and Stud/Nut Thread Sizing also matches the specifications listed above. CNC Machined Aluminum Wheel Adapter Spacers
Highlights
Allows your vehicle to use 5x100 Bolt Pattern Wheels
Widens your vehicle's track for improved handling and improved safety.
Helps provide "flush" look by eliminating wheel & fender gap.
Gives more inner fender & suspension clearance for installing larger, oversized tires.
Increased brake caliper clearance, allowing you the flexibility to install big brake kits.
Includes pre-installed wheel studs and lug nuts necessary to complete the installation.
Designed & Engineered in California, our products ship from Los Angeles, arriving at your door in 1-4 working days.
Made from Aerospace Grade Aluminum
Manufactured using CNC lathes & mills to exacting, tight tolerances Quantity Four (4) Spacers (20 Lug Nuts Included) Thickness Per Spacer 1.0" (25mm) Vehicle Bolt Pattern 5x114.3 or 5x4.5 Wheel Bolt Pattern 5x100 Centerbore 73.1mm Material T6 Aerospace Grade Aluminum Stud/Nut Thread Size 12x1.5 Stud Grade Metric Grade 10.9
Bolt Pattern Diagram
(Click Corresponding tab below for Fitment & Shipping Information)
Please be sure to measure the bolt pattern of both your vehicle and the wheels. Since 4-lug, 5-lug, 6-lug, & 8-lug patterns are measured differently, use the "Bolt Pattern Diagram" above to ensure it is measured correctly.
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
As shown in the pictures, these spacers do not have a wheel-centric lip. If your wheels do not use conical/cone seat lug nuts, there is a high chance it will not center properly which could result in steering wheel vibration.
Hubcentric Rings / HubRings
- If your vehicle hub is smaller than 73.1mm, these spacers will not properly center around your hub which could cause steering wheel vibrations. We recommend purchasing hubcentric rings to reduce/prevent steering wheel vibrations.
- You can click on one of the following links to purchase hubrings from us: Aluminum or Plastic. If you would like help finding the correct one, please send us an eBay message.
Before Purchasing
- Measure your wheel gap for clearance. You will need at least 1.0" (25mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner.
- The vehicle’s wheel studs need to be measured. If the studs are longer than 1.0" (25mm), it will extend past the spacer's surface. It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
- If your vehicle does not have 12x1.5 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug Nuts (on the spacers and the wheels) MUST be torqued to manufacture specifications. After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL lug nuts after 25-50 miles of driving. This requires you to take off the wheels to tighten the lug nuts holding the spacers to your vehicle.
No returns or exchanges once product has been installed on the vehicle.
NOTE: Make sure wheel bolt pattern is measured correctly (See Bolt Pattern Diagram above)
Can fit on any 5x114.3 (5x4.5") Bolt Pattern Vehicle with 12x1.5 threaded studs/nuts. Examples below:
2003-2007 Acura MDX
1997-2011 Honda CRV
2003-2006 Honda Element
1995-2004 Honda Odyssey
1997-2004 Toyota Tacoma - 2WD Only, Excludes Pre-runner
2005-2008 Toyota Tacoma - ONLY fits 5-Lug
2006-2008 Toyota Highlander Hybrid
1996-2011 Toyota RAV4
1998-2002 Lexus RX300
2003-2006 Lexus RX330
2006-2011 Lexus RX400h
1980-1995 Toyota Pickup - 2WD Only
2007-2011 Jeep Compass
2007-2011 Jeep Patriot
2010-2012 Kia Sorento
2001-2011 Hyundai Santa Fe
2005-2011 Hyundai Tucson
1995-1997 Toyota Tacoma - 2WD Only, Excludes Pre-runner
2003-2008 Honda Pilot
2002-2005 Land Rover Freelander
1996-2007 Dodge Caravan
1993-2012 Dodge Grand Caravan
Don't see your vehicle above? Message us with the year, make, & model of your vehicle and we will help!
Local Pick up / Will Calls - Not Available
NOTE for International Customers: Buyer is responsible for any import taxes and/or customs charges for the item. The amount may vary from country to country.