When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $8.89
What are Hub Centric Rings?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle\'s hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel\'s centerbore is not already centered around the hub.
Why do I need it?
You may experience steering wheel vibrations if your wheel\'s centerbore does not perfectly center on your vehicle\'s hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle\'s hub.
How can I confirm fitment?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 60.1mm. This should match your vehicle\'s hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 66.1mm. This should match your wheel\'s centerbore.
Compatibility Information:
These hubrings are only compatible with Toyota and Lexus vehicles with a 60.1mm Hub. In addition, your Wheel Bore MUST BE 66.1mm. Message us with year/make/model if you have any fitment questions.
Important Fitment Notes - Required Buyers Check These Before Purchasing
- Buyers must ensure their Vehicle\'s Hub is 60.1mm.
- Buyers must ensure their Wheel\'s Centerbore is 66.1mm.
- If you are not unsure about fitment or the measurements, please do not guess. Reach out to us for help.
Installation Advisory
Be sure to clean your hub and wheel bore prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub and/or wheel bore could cause the ring to not fit.Powered by Frooition
For Vehicles with 60.1mm Hub
AND
Wheels with 66.1mm Bore
-
StanceMagic Hub Centric Rings made of CNC Machined billet aluminum. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel\'s centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
-
HUB RING INNER DIAMETER: 60.1mm (Your vehicle\'s hub lip diameter needs be this size)
-
HUB RING OUTER DIAMETER: 66.1mm (Your wheel\'s center bore needs to be this size)
-
[FITMENT] Compatible with Toyota 2001-2020 Highlander, 2004-2015 Tacoma (2.7 2WD & X-Runner Only), 1995-2020 Avalon, 1976-1985 Celica, 1992-2011 Camry, 2003-2008 Corolla, 1996-2020 Rav4, 1990-2000 MR2 (2.0 Only), 1999-2008 Solara, 1986-2002 Supra. Compatible with Lexus RC200t RX300 RX330 RX350L RX400h RX450h ES300 ES330 ES350 GS200t GS300 GS350 GS400 GS430 GS450h IS200t IS250 IS300 IS350 LS400 LS430 SC300 SC400 SC430 NX200t.
-
IMPORTANT: Before ordering, please measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing.
(Vehicle Hub Size) 60.1mm Outer Diameter
(Wheel Bore Size) 66.1mm Material Aluminum Color Silver FITMENT INFORMATION
Compatible with vehicles with a 60.1mm hub that needs to center a wheel with 66.1mm centerbore.
Please see eBay\'s Vehicle Compatibility Table for a list of applicable vehicles
Please Verify the measurement of your VEHICLE BORE AND WHEEL before purchasing
eBay\'s Parts Compatibility Chart above should only be used as a guideline.