4 Jeep Wheel Spacers fits 2018 Wrangler JL 1.5" 5x5 Hub Centric 14x1.5 Studs for Sale

Price: $99.99

▲Wheel Bolt Pattern:5X127mm/5X5"

▲Vehicle Bolt Pattern:5X127mm/5X5"mm


▲Hub/Center Bore:71.5 mm Hubcentric

▲Thread Pitch:M14X1.5/14mmX1.5
▲Wheel Studs:10.9 Grade soild bolts

▲Surface Finish:Anodized

▲Torque Specs:85-90 ft/lb
▲Material:6061 T6 Billet Aerospace Aluminum


2018-2021 Jeep Wrangler JL

2011-2021 Jeep Grand Cherokee WK2

2019-2021 Jeep Gladiator JT

2011-2021 Dodge Durango

2018 Jeep Wrangler JL 2019 Jeep Wrangler JL 2020 Jeep Wrangler JL 2021 Jeep Wrangler JL
2011 Grand Cherokee WK2 2012 Grand Cherokee WK2 2012 Grand Cherokee WK2 2012 Grand Cherokee WK2
2013 Grand Cherokee WK2 2014 Grand Cherokee WK2 2015 Grand Cherokee WK2 2016 Grand Cherokee WK2
2017 Grand Cherokee WK2 2018 Grand Cherokee WK2 2019 Grand Cherokee WK2 2020 Grand Cherokee WK2
2021 Grand Cherokee WK2
2019 Jeep Gladiator JT 2020 Jeep Gladiator JT 2021 Jeep Gladiator JT
2011 Dodge Durango 2012 Dodge Durango 2013 Dodge Durango 2014 Dodge Durango 2015 Dodge Durango
2016 Dodge Durango 2017 Dodge Durango 2018 Dodge Durango 2019 Dodge Durango 2020 Dodge Durango
2021 Dodge Durango

  • HubCentric Chamfered Design.
  • Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and 10.9 degree lug nuts.
  • Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
  • It's recommended that buyers take the propermeasurements to ensure that by adding the spacer, their wheel/tire won'thit the fender or any other part of the vehicle.
  • Be sure to torque the lug nuts to manufacturer specifications.
  • No returns or exchange once installed.
  • Installation should only be performed by a trained professional.
  • Give your vehicle amore aggressive appearance, could installation a wider, larger, or hightraction tires. Bring a better driving experience.

Before Installation
1.Please check the model and the product specifications before purchase.
2. How to measure the fender gap to choose suitable thickness?(1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.(2)Please take multiple measurements and use the smallest data point.( The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
3. For 1.5 inches or less thickness
(1) if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them,(2) you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.
During Installation1. Use wire brush to clean gunk firstly. And it will better put some loctite on the hub and thread pitch, which will be easy to install.
2. Alloy wheels should always be installed using a torque wrench ensuring proper mount.DO NOT USE AN IMPACT WRENCH!3. It is also important to tighten lug nuts or bolts incrementally to the final torque specification, and doing so in the proper sequence.
After Installation1.Re-torque all lug nuts after 50-100 miles of driving ,then again after 2000-3000 miles

Parts Search: