2pcs Official USA Billet Park Lock Out Mechanism Magnum Charger 300 Pacifica​ for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $29.99


This Auction is for 2 Billet Park Lock Out Mechanism s to give you an additional savings on each unit of $2.502pc BILLET PARK LOCK OUT DODGE
( 2 Replacement Springs Included )Part Number:UPR-PINK-THINGY-2MFG Retail: $99.98Fits:Dodge Charger Magnum 300 and Chrysler PacificaFits Years:2005 2006 2007Includes: V6 V8 SRT8

Product Description: ** 2 Replacement Springs Included**
  • USA Made
  • Lifetime Warranty
  • (AKAPinkThingy)
  • CNC Machined 6061 Billet Aluminum
  • Billet Dodge Park Lockout Mechanism
  • Replace the factory plastic park lock out mechanism
  • Works on 05-07NAG1&42RLETransmissions only

Our CNC Machined Billet Aluminum Part vs. the Competition's
inferior cast park lock out pictured below:Installation Time/Difficulty:
60 Minutes or less / Easy Difficulty Level ------ Comes withinstallation instructions.

New Indestructible AKAPinkThingypark lock out mechanism replacement.
*IMPORTANT INFORMATION REGARDING SHIPPINGOrders are processed and shipped Monday-Friday only, WE DO NOT SHIP ON WEEKENDS. Orders are processed on the same business day with the exception of weekends and holidays. Orders must be placed by 2PM EST for same day processing & shipping. Orders placed between Friday after 2pm and Sunday will be processed and shipped out on the following Monday. Contact us immediately with any questions or concerns.


Welcome to Billet Depot on eBay!
Billet Depot offers you the BEST Prices and the BEST deals on eBay! We pride ourselves on excellent customer service, so be sure to contact us with any problems or questions about your order by sending us a message through eBay messaging. We believe in selling you the highest quality products and every purchase comes with our customer satisfaction guarantee.
Customer Feedback
this product is excellent--highly recommend--nice to see made in USABuyer:tyfrompa(69)Sep-04-12 19:5205-06-07 DODGE CHRYSLER PARK LOCK OUT PINK THINGY CHARGER MAGNUM 300 PACIFICA (#290728560249)US $24.99View ItemSUPER FAST SHIPPING.. GR8 ITEM... AAAAA++++Buyer:txspoiled(343)Aug-16-12 13:5205-06-07 DODGE CHRYSLER PARK LOCK OUT PINK THINGY CHARGER MAGNUM 300 PACIFICA (#290728560249)US $24.99View Item
Very fast shipping. Item arrived in perfect condition. Great Seller. A+++mhedgehog21(127)May-31-12 20:342005 2006 2007 Billet Park Lock out Mechanism Fits Magnum Charger 300 Pacifica (#300697043137)US $24.99View Item
To make your purchase and installation as smoothand easy as possible, please refer to the instructions below.
********* Dodge Chrysler Park Lock Out Mechanism Installation Instructions *********
1. Secure the tires to make sure the car will not roll when put in neutral.2. Press the brake pedal in, turn the key to the on position and move the shifter into neutral, then turn the key off (you won’t be able to remove move the key with the car in neutral).3. Disconnect battery.4. Remove shift knob5. Open center console, remove molded rubber bottom to get to the 3 bolts 8mm and remove them.6. Remove the rubber tray under the ashtray7. Remove the rubber liner to the right of the shifter.8. Remove the plastic trim ring around the shifter by pulling up gently around the edges there are tabs that secure it in the center console.9. Remove the center dash trim around the radio. There are tabs that snap into the dash up near the AC vents, on either side of the radio and by the AC controls. Start at the AC vents and gently pull the trim towards you, then the radio area and AC controls last till the panel comes free.10. The trim panel can be left hanging loose or the electrical connectors can be disconnected so it can be put to the side.11. Pull out the ashtray assembly and right behind it are two screws. Remove the two screws that hold the center console to the dash.12. To remove the center console pull it back about 1-2 inches to disconnect the air vents in the back of the console from the air ducts.13. Disconnect the plug from the power plug and remove center console the rest of the way.14. Disconnect the two electrical plugs from the back of the shifter.15. Disconnect the brake lockout cable (on driver side of shifter in front) by pressing on the brake pedal and pulling the white housing out of the bracket and lifting the cable end out of the ear on the cylinder.16. Next the shifter cable needs to be removed (on the passenger side of the shifter in front). You will disconnect it by remove the bolt to the bracket but first make sure you mark where it is located so you can return it to that position when done.17. Once the shifter cable is disconnected remove the cable assembly from the plastic retainer, which is part of the shifter base. There is a single tab that locks it into place.18. Remove the (4) 10mm nuts holding the shifter to the floor.19. At the back of the shifter disconnect the wire going from the base to the top of the shifter for the shift gate lighting.20. Separate the shifter assembly by releasing the 3 tabs found along the bottom of the assembly. The one at the back of the housing should be done first then the two on either side next.21. Make sure the shifter is in neutral to remove the factory brake park lockout (pink thing).22. Add a dab of grease to the shaft the park lockout was sitting on.23. Install the new park lockout keeping it oriented the same as the factory one.24. Reconnect the shifter to the lockout and reconnect the spring from the shifter base to the lockout.25. At this point you can now reassemble the shifter base and retrace the steps to reassemble your car.


Parts Search:


Follow