When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $26.99
[ NOTE ] These are OEM Length lug bolts and are NOT meant to be used with wheel spacers.
[ NOTE ] Socket Key has 23.5mm Outer Diameter. Buyers need to check their wheel\'s lug hole size is large enough.
[ SPECIFICATIONS ]
Thread Size: 12x1.5
Color: Black
Seat Type: Cone Seat (60 Degree Taper)
Shank Length: 26mm
[ FITMENT ]
Compatible with BMW 3-Series E30 E36 E46 E90 E91 E92 E93 (Up to 2012)
Compatible with BMW 5-Series E28 E34 E39 E60 E61 (Up to 2010)
Compatible with BMW 6-Series E24 E63 E64 (Up to 2003)
Compatible with BMW 7-Series E23 E32 E38 (Up to 2001)
Compatible with BMW 2000-2009 Z3 & Z4 (E52 E85 E89)
[ NOTE ] Buyers responsible for confirming vehicle has 12x1.5 boltsPowered by Frooition
-
IMPORTANT: MEASURE YOUR OEM BOLT SHANK LENGTH prior to purchasing. Vehicles come with a variety of bolt lengths. This 26mm Shank Length bolt will NOT FIT if it is not the same size as your OEM lug bolt. See Diagram for Measuring Help. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.
-
WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicle\'s bolt thread size, as various years/models come with different size bolts. These are Cone Seat (60 Degree Taper) shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.
-
[SPECIFICATIONS] Pack of 20 Locking Spline Black Lug Bolts | Thread Size: 12x1.5 | Seat Type: Cone Seat (60 Degree Taper) | Shank Length: 26mm (This is the thread length) | Includes 6-Point Spline Socket Key.
-
MANUFACTURING: Made with cold forged steel. Machine precision threads ensure the best fit on your vehicle\'s hub. Zinc coating provides exceptional corrosion/rust resistance and appearance. Additional Heat Treating Process ensures dependable strength, durability, and performance.
-
FITMENT: Compatible with BMW 2012 & older 3-Series (E30 E36 E46 E90 E91 E92 E93); 2010 & older 5-Series (E28 E34 E39 E60 E61); 2003 and older 6-Series (E24 E63 E64); 2001 and older 7-Series (E23 E32 E38). Also compatible with BMW 1996-2009 Z3 & Z4 (E52 E85 E89).
Quantity Set of Twenty (20) Lug Bolts Thread Size 12x1.5 Seat Type Cone Seat (60 Degree Taper) Shank Length 26mm Grade 10.9 Grade (Factory OEM) Hex Size Spline Material Steel (Heat Treated) Finish Black Zinc Plated (Prevents Rust & Corrosion)
FITMENT INFORMATION
How do I determine what Shank Length I need?
1) Measure shank length of OEM bolt (Threaded portion, starting at end of the seat to the end of the bolt)
2) Measure the thickness of the spacer you will be using (if not using a spacer, then this measurement is zero)
3) Add measurements from step 1 and step 2. And that is the shank length you need
What is the difference between Cone and Ball seat?
This is determined by your wheel\'s lug seat. The seat of the bolt refers to the part of the bolt that makes contact with the wheel\'s lug seat. The most common seats are Cone (conical / tapered) and Ball (radius / rounded). Cone type features a straight taper seat, whereas Ball type features a curved seat.
eBay\'s Compatibility Table above should only be used as a guide. The buyer is ultimately responsible for taking proper measurements and ensuring they are choosing the correct length bolt for their application
Before purchasing, check the Thread Size, Seat Type, and Shank Length to ensure it matches your vehicle\'s specs. View Diagram above. And see the Important Notes tab below for more details.
Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer\'s responsibility to ensure they are purchasing the correct thread size.
Verify Shank Length - It is not possible for us to know what you need for your application if you don\'t ask. It is the buyer\'s responsibility to ensure they are purchasing the correct length.
Verify Seat Type - Wheel Lug Holes have either cone seat or ball seat. It\'s impossible for us to know what you have. Therefore, it is the buyer\'s responsibility to verify the seat of this bolt matches their wheels
Verify Wheel Lug Hole Diameter - The socket key that comes with these lug bolts are 25mm (1") in diameter. Your wheel lug hole diameter must be larger than that.
Installation
Professional Installation Recommended
Be sure to torque the lug bolts to the vehicle manufacturer specifications
Avoid using an impact wrench; improper usage may cause damage to components
Check and re-torque after 25-50 miles of driving