When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $12.00
INSTALLATION INSTRUCTIONS
WINDSHIELD BANNER INSTALLATION GUIDELINES
LARGE DECAL INSTALLATION GUIDELINES
SMALL DECAL INSTALLATION GUIDELINES
Quick Vinyl Application TipsDo not apply in cold weather - adhesive may stick but will lift easily.Do not apply in extreme heat, apply in the shade - vinyl will get very soft and stretch.Do not use alcohol to apply - it will destroy the adhesive.Do not use ice scraper on the sticker/decal - may lift or break pieces off..Do not touch the adhesive backing - oils from your skin will prevent sticking.Do not point high pressure car wash nozzle at the edges of the sticker/decal for a longtime - may lift or break pieces.Car washes are safe.Before application make sure there is no wax or rainx products on the surface -adhesive may stick but will lift easily.Don't apply wax over graphics, especially if the wax contains any petroleumdistillates.Temperature RecommendationsSurface temperatures MUST be between 50 and 90 degrees Fahrenheit before attempting theinstallation. As a general rule, if the surface is hot to the touch it's over 90 degreesFahrenheit. Adhesive becomes brittle when it gets too cold and gummy when it gets too hot.Applications outside the recommended range of 50 to 90 degrees Fahrenheit reduce theadhesives' ability to perform.Cleaning ProceduresAll surfaces are contaminated to some degree. To ensure good adhesion to any vehiclesurface it is critical that you follow these recommended procedures in decontaminating andpreparing the surface prior to any vinyl product installation.1.Wash and rinse the area with liquid dish detergent and warm water. Then dry the surfacewith a clean, lint-free towel or cloth.2.Finish up the cleaning process by wiping down the entire area with Isopropyl Alcohol(rubbing alcohol).You are now ready to apply the vinyl.Application ProceduresYou can choose to apply vinyl in one of two ways; dry or wet. Applying vinyl dry does notallow for any mistakes, and recommended for small decals. Once the vinyl touches thesurface, there is no removal without damage. We suggest that all customers use the wetprocess for larger graphics.