When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $239.00
1967-72 FORD STANDARDCAB TRUCK UPHOLSTERY
Thisupholstery fits a standard cab bench seat.
Thisupholstery is all vinyl.
Pleaseconfirm that your current seat has this same pleat pattern for a perfect fit.
Thisset is offered in a two tone vinyl.
Pleasechoose your color from the color photo below.
Theupholstery will have the upper color in the scan in the flat unpleated portionof the seat and the lower color will be the pleated area color.
Forexample the “Red” Selection will have “Firethorne 4998” on the flat sectionsand “Red 4558” in the pleated areas.
The default color is Black 4560 with Black 958 inserts
Ifyou prefer one of the other colors offered please put that color request on thePayPal payment area called “Note to seller.”
Wewill contact you with an email requesting your confirmation of color beforeplacing your order.
ALL UPHOLSTERY ISMADE TO ORIGINAL FACTORY SPECIFICATIONS!
This upholstery isa perfect replacementbecause it is not just a cover - it is real upholstery. Just slip yourold upholstery off and slip these brand new ones on.
This is a DIYproject for most people.
This upholstery is designed for a custom fitin the original style and made to exact specifications.
All of thepatterns follow the factory pleat design, sewing pattern and factory attachment points.
If your upholstery does not look like this one then we may haveanother pattern that matches – please contact us.
- All car and truck upholstery is offered in the original pleat patterns.
- Confirm a perfect fit by making sure that your current upholstery follows the pleat pattern in the picture listed for this item.
- The upholstery fabrics we list are offered as original material or a current equivalent.
- All upholstery will have ½” of foam on the underside of the fabric.
- All upholstery will come with installation instructions, hog rings and pliers.
WE CAN DO CUSTOM COLORS AND FABRICSON ALL UPHOLSTERY
PLEASE CONTACT US FOR THOSE OPTIONS
Please call customer service number[phone removed by eBay]
We want the opportunity to earn yourbusiness!
ALL ITEMS PROUDLY MADE IN THEUSA!
1. Shipping pricefor items delivered within the contiguous U.S. states.
2. Alaska, Hawaii,Guam, or Puerto Rico has additional shipping expense - please contact us.
3. We do not shipto APO/FPO/PO Boxes or Military Mail Box.
4. We shipworldwide - please contact us for shipping costs.
GENERAL SEAT UPHOLSTERY INSTALLATIONINSTRUCTIONS
The seat upholsteryis made to fit as tight as the originals. Do not pull at seamsexcessively as it is possible to tear upholstery at these points.
1.Remove the seat from the vehicle and separate the seat back from the bottom.
2.Removethe old seat upholstery and hog rings – note the fastening points. Newupholstery will fasten at or near these same locations.
3.Make any necessary repairs or replacements to the pads, springs and frame.
4.Thebackrest upholstery and seat upholstery are not interchangeable.
5.Turnthe backrest upholstery inside out and place on top of the backrest.Slide down evenly while unrolling the upholstery working each side until theyare even. Install hog rings where required working from the centerto each side. Wherever there is Velcro for an attachment the hog ringsare not required. Adjust the Velcro to align the back rest pleatswith the bench seat pleats.
6.Turn the seat bottom upholstery inside out and place on the front of theseat. Make sure the center of the upholstery is aligned with the centerof the seat back upholstery. Pull the upholstery over each front cornerworking each side toward the back until they are even. Install the hogrings one at a time where required and start in the center working toward thesides.
Note: If yourupholstery set has a plastic “J” channel there are no hog rings required inthat area. Simply snap the plastic channel onto the metal flange on thebottom of the seat frame.
7.Re-assemble the seat and install back in the vehicle.
Installation iseasier if the upholstery is warm. Vinyl has more elasticity and is easierto contour.
A thin layer ofplastic put over the cushions will help make the seat upholstery slide downover the backrest and seat pad.