Price: $17
This item has been shown times.
Click HERE for more information about this part.
RS10
Same as RM11
12V Universal Remote Control Switch
with
MOMENTARY REMOTE CONTACT
Momentary mode: press and continue to hold remote button to close relay contact, release remote button to open relay contact.
Features:
-Order includes 2 remotes and one controller.
-Remotely
turnOn and Offfor any 12 Volt DC devices such as computer lighting
& accessories, auto lighting kits, landscaping lighting, boat
lighting, hunting decoy devices, and other electronic applications.
-Compact size and mounting holes make it easier for installation.
Specs:
Input voltage: DC 12V
Operating Bandwidth: 315MHZ
Receiver standby Current: ~4.5mA
Operating voltage: 10Vdcto 18Vdc max
Max load: 10A
Dimension: 2" x 1.75" x 1"
Remote: one button remote, press down and hold to operate, release to stop all operation
Remote range ~80ft
Remote Battery: 27amp, 12V
Remote Dimension: (2 1/4" H) x (1" W) x (3/8" D)
Wire layout:
Red wire: 12vdc positive power input
Black wire x2: for ground or negative connection for both input power and output device
Green wire: Antenna, no connection required
White wire: 12Vdc positive power output when receiver box is turn on
Connect power source 12vdc (+) to Red wire
Connect power source Ground (-) to Black wire (there are 2 black wires, both the same.)
Connect White wire to output device 12Vdc (+).
(note. output voltage will be the same as input
voltage, for example, if youfeed in15Vdc to the input, your output
will also be15Vdc when relay is turn on.)
Connect Black wire to output device Ground (-)
Mount Blue
wire (Antenna) to where you can get a best reception from remote
control, make sure tip of antenna wire does not touch any live voltage.
Note: An in line fuse is recommended to prevent any surge or short to this kit or your connected device.
Caution! Do not connect directly to any 120/240VAC power without using a12V AC/DC converter or adapter.
