When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $832.50
WELCOME TO
MIDATLANTICLOCKSMITH:ABOUT US:
WE ARE A LOCKSMITH SUPPLY COMPANY WITH OVER 12 YEARS OF EXPERIENCE. UNTIL NOW WE HAVE KEPT OUR BUSINESS ONLY LOCAL TO THE GENERAL PUBLIC. WE NOW HAVE DECIDED TO EXPAND OUR MARKET AND MAKE OUR KEYLESS ENTRY SERVICES AVAILABLE ONLINE. PLEASE BID IN CONFIDENCE AS YOU ARE ASSURED A QUALITY PRODUCT, FAST DELIVERY, AND A GREAT ONLINE SHOPPING EXPERIENCE.:FOR SALE:
(ONE)
GREAT CONDITION ORIGINAL MITSUBISHI
KEYLESS ENTRY REMOTE FOB TRANSMITTER
100% OEM REMOTE
FCC ID: E4EG8D-522M-A
OMRON G8D-524M-A4 BUTTON REMOTEUNLOCK, LOCK,TRUNK, PANIC
:COMPATIBLE WITH:
2000 2001 2002 2003
MITSUBISHI DIAMANTE
MAY WORK WITH OTHER MODELS AND YEARS.PLEASE BE SURE TO
MATCH FCC ID IN LISTING WITH YOUR CURRENT REMOTEORBE SURE TO CHECK WITH YOUR LOCAL DEALER BEFORE BIDDING
THE ITEM LISTED IS A FACTORY ORIGINAL OEM REMOTE AND WILL WORK WITH YOURFACTORYKEYLESS ENTRYSYSTEM. PLEASE BE SURE YOUR VEHICLE HAS THE COMPATIBLE SYSTEM BEFORE BIDDING .PLEASE MATCH FCC ID NUMBERS WITH CURRENT REMOTE.ALL ITEMS ARE PRE-TESTED AND HAVE A WORKING BATTERY INSTALLED
:PROGRAMMING:
GENERAL FREE PROGRAMMING INSTRUCTIONS WILL BE POSTED AT THE BOTTOM OF THE PAGE
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 3 DAYS OF AUCTIONS END:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY.
WARRANTY\'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 1 BUSINESS DAYS OF RECEIPT OF PAYMENT.
ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.THANK YOU FOR VISITINGMIDATLANTICLOCKSMITHIF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CONTACT US THROUGHEBAY MESSAGING
Obtain all remote transmitters for this vehicle. This procedure\'s a little more complicated than others, we recommend having someone help you perform this procedure. We have found it easier to have one person manage the jumper wire while the second person performs the procedure. Please understand: We don\'t write these procedures or design these cars. We simply provide the FREE information and pass it along to save you money.
- Locate the Data Link Connector (DLC). It will be under the dash on the drivers side. You may need to lay on the floor and look up to easily access it. Use the diagram above to identify ports 1 and 4. Notice that the DLC connector is tapered. You can use this to help identify the proper ports. Be sure there\'s metal contact pins in ports 1 and 4.
- Insert key into the ignition and leave in the OFF position.
- Using a suitable jumper wire, jump pin 1 to pin 4. Jump means to make a connection between the two pins using any metal wire. A paperclip bent in the shape of a \"U\" usually works perfect. Be certain the jumper wire makes contact with the pins in ports 1 and 4. Once the jumper wire is installed it needs to remain there throughout this procedure until instructed to remove.
- Within ten seconds of connecting the jumper wire, turn the ignition switch to ACC then back to off, THREE times. You must do this step very quickly, all three cycles should take 2-3 seconds. (ACC is the position when you turn the key back toward you, OFF is the position where you can remove your key). The doors will automatically lock and unlock once indicating the vehicle is in programming mode.
- Now press the LOCK button on the first remote to be programmed THREE TIMES within ten seconds. The doors will automatically lock and unlock once indicating the vehicle has programmed that remote.
- If you have additional remotes to program, repeat step 5. within one minute.
- Once all remotes are programmed remove jumper. Test all remotes to ensure proper programming.