Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

[FRONT KIT] PERFORMANCE DRILLED BRAKE ROTORS & LOW DUST CERAMIC PADS ($ BREAK) for Sale


Parts Search:
If you like this part use the Google +1 button:


[FRONT KIT] PERFORMANCE DRILLED BRAKE ROTORS & LOW DUST CERAMIC PADS ($ BREAK)

Price: $69

This item has been shown 0 times.

Click HERE for more information about this part.

Untitled Document Toll Free (877) 477-9320 FRONT BRAKE KIT

Includes:
- 2 Front cross drilled rotors
- 1 Front set of 4 performance ceramic pads
-

Buick Skylark 1990 models with 10.2” diameter front rotors only (will not fit vehicles with 9.7” rotors) Buick Skylark 1991 – 1998 All Chevrolet Beretta 1992 – 1996 Chevrolet Cavalier 1992 – 2005 Chevrolet Corsica 1992 – 1996 Oldsmobile Achieva 1992 – 1998 Oldsmobile Cutlass Calais 1990 – 1991 models with 10.2” diameter front rotors only (will not fit vehicles with 9.7” rotors) Pontiac Grand Am 1990 models with 10.2” diameter front rotors only (will not fit vehicles with 9.7” rotors) Pontiac Grand Am 1991 – 1998 All Pontiac Sunbird 1992 – 1994 Pontiac Sunfire 1995 – 2005 CROSS DRILLED ROTORS BY KINETIC RACING

Kinetic rotors are machined from the finest G3000 grade castings the ideal balance between tensile strength and hardness.

PERFORMANCE CERAMIC PADS

Kinetic Ceramic Pads offer superior resistance to fade without the noise and dust associated with metal pads.

CHAMFERED AND SLOTTED LIKE THE OE PAD THERMAL SCORCHED FOR FAST BREAK-IN More Stopping Power Than Other Leading Brands
FASTER STOPS!

Cross drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691 "The Effect of Rotor Cross-drilling on Brake Performance". That is why Corvette, Porsche, Mercedes and BMW vehicles come factory direct with drilled brake rotors, i.e. not dimpled or slotted. The fact is that the drill holes greatly improve convection heat transfer and the result is more pad bite. The report also states that "it is possible to have too many holes, in which case too much cooling air would be lost before reaching the hottest part of the rotor". Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking.

STOP ROTOR WARPING!

High rotor temperature can cause heat spots to form in the rotor, and this cases pulsating brakes. Cross drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping.

GENUINE KINETIC CERAMIC BRAKE PADS!

Most vehicles come with ceramic pads from the factory. Kinetic's pads are the perfect replacement for serious street performance. All pads are made using positive mold technology for quiet, consistent braking. Pads are chamfered and slotted like the OE, and come with dual layer rubber shims.

Brakemotive is one of the largest brake suppliers in North America, with over 100,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our performance rotor and ceramic pad kit is at or below the cost of equivalent plain rotors and pads from your neighborhood retail store.

Our engineering team uses advanced CAD (computer aided design) software to configure the drill holes and slots for optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the fitment information in this listing before you order. We never request a restocking fee if you do order the wrong parts.


Brakemotive has lightning fast shipping, in fact over 98% of our orders ship within 2 business days from our 70,000 square foot mid-west warehouse. Fedex will deliver packages to your door including Saturday. Fedex shipping takes 1 to 4 days depending on your location. We always e-mail your tracking information (to your registered e-mail) as soon as it ships.


The Brakemotive team members are available to answer your questions Monday through Friday from 9:00 to 5:00 central time. If you can't find the parts for your vehicle, just give us a call. Toll Free (877) 477 9320 BRAKEMOTIVE ROTORS AND PADS HAVE A 120 DAY WARRANTY AGAINST WORKMANSHIP DEFECTS AND WARPING.

Warranty is valid from the date of purchase provided that the product has not been subject to abuse or misuse in its use or installation, or has not been subject to modification or alteration. Products must be installed per the manufacturer's instructions. Warranty does not cover normal wear and tear or damage caused by negligence, lack of maintenance, abnormal operation, track racing, off-road use, or improper installation. The warranty is non-transferable. All warranty claims require a proof of purchase, and an RGA is required from Brakemotive for the return. Customer will be responsible for return shipping cost. Compensation for any warranty claim will be either store credit or replacement of a product of equal value. No additional fees for installation or any other cost will be reimbursed with warranty claim. Only one warranty claim is allowed per customer. Brakemotive neither makes nor implies any other warranty as to suitability for purpose other than expressly warranted here and is not liable for any form of consequential damage losses or cost.

Shipping is FREE to the 48 contiguous states. There will be a $115.00 (USD) shipping cost for shipments going to Hawaii, Alaska and Puerto Rico. Shipping cost to Canada will be $115.00 (USD); this cost includes all taxes, and brokerage fees. For shipments to Illinois addresses, we are required to collect 9.25% sales tax. We cannot ship to PO boxes, if you place and order with us and the address on your account is to a PO Box the parts will not ship until we receive a physical address from you. We apologize, but we are unable to ship to APO addresses.

We prefer PayPal and accept all major credit cards. Payment must be received within (7) days of checkout, or item will be forfeited, and a non-payment dispute will be opened with and PayPal to recover the closing fees of the sale.

Are the drilled holes and slots directional?

Yes, the rotors are machined based on their orientation on the vehicle. Driver's side (left) and passenger's side(right) have unique patterns so the slot trails toward the back of the vehicle.

CLICK HERE for guide.

How many pads come in a "set"?

On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Please note that some applications such as Audi and Corvette, among others, have a unique number of pads based on their caliper design, e.g. a Corvette Z06 set is 12 brake pads for the front and 8 brake pads for the rear. The important thing to understand is that a "kit" refers to all the parts for the application specified, I.e. front is two complete front wheels; front and rear is four complete front and rear wheels.

Are any modifications necessary to make these rotors fit my vehicle?

No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation.

Is the brake rotor picture the same as the rotor I will receive?

The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. The purpose of the image is for visual representation of a typical patter of the machined drill holes and slots as well as the silver zinc surface finish.

Will I get tracking information?

Yes, tracking information is automatically sent to your email address when the items have been shipped. Typical handling time is one to three business days after payment has cleared, so you will typicall get the e-mail from Fedex within 72 hours. Please check your junk mail box for the Fedex tracking information as it sometimes ends up there.

How do I know if I have Solid Rotors or Vented Rotors?

CLICK HERE for guide.

What causes rotor warping?

CLICK HERE for guide.

Drilled vs slotted rotors, what is better?

CLICK HERE for guide.

Metallic vs Ceramic Brake Pads.

CLICK HERE for guide.

Jeep Grand Cherokee - Do I have Akebono or ATE/Teves front calipers?

CLICK HERE for guide.

Toyota Trucks - Do I have ST3WE or 13WL Calipers?

CLICK HERE for guide.


Follow DragTimes on Twitter
Share |


Similar 1/4 mile timeslips to browse:

1997 Dodge Neon Sport: 9.846 @ 145.050
Steve Lockett, Engine: 2.4,


1998 Dodge Neon : 10.010 @ 138.000
Ed Carpino, Engine: 340 bored to 383 small blck crysler, Tires: mickey tompson et drag


1998 Dodge Neon ACR Coupe: 10.240 @ 130.000
Len Ayala, Engine: 2.0L chrysler, Turbos: Garrett GT series Tires: M/T


1999 Dodge Neon sport coupe: 10.350 @ 142.000
Eric Duncan, Engine: 2.0 , fully build, DOHC, Tires: m/t 24.5x13x8


1998 Dodge Neon Highline SOHC: 10.710 @ 124.000
Kevin Flint, Engine: 2.0 SOHC, Supercharger: n/a Turbos: t-52 Tires: 24.5x8x13 Hoosier


1996 Dodge Neon sport: 10.760 @ 128.000
Angela Galante, Engine: 2.4, SRT internals, Turbos: Hahn Racecraft 25G Tires: 24 1/2X8X13 Hoosier slicks


1997 Dodge Neon ACR: 11.294 @ 127.820
Matt Tripp, Engine: 2.4 DOHC (SRT-4 swap), Turbos: BW S372 Tires: M&H 25x8.7


1996 Dodge Neon 2door 2.2Lstroker nitrous: 11.400 @ 124.000
matthew devoe, Engine: 2.2Lstroker, Tires: mh 24.5/8.5/13slick mh 24/3.5/15 skinny


1998 Dodge Neon Coupe: 11.736 @ 123.865
Christian Nolin, Engine: 2.4, Tires: 24.5x8.5x13


1996 Dodge Neon Sport Coupe: 11.800 @ 123.750
Eric Urness, Engine: 2.4L, Turbos: T3/T04S 60trim .70ar/ .63ar 76 trim Tires: 25x9x13 M&H


1998 Dodge Neon R/T: 12.250 @ 122.780
Craig Martinelli, Engine: 2.0 DOHC, Turbos: Super 20G-H Tires: BFG Drag Radials


1995 Dodge Neon ACR: 12.313 @ 111.510
Jeff Ball, Engine: 1997 Dodge 2.4, Tires: Hoosier 24.5 x 8 -13


1995 Dodge Neon ACR: 12.386 @ 117.600
ROBERT PYSZKA, JR., Engine: 2.0L (1996cc) DOHC 420A, Turbos: GARRET T3/T4 Tires: NITTO 555 SERIES DRAG


1998 Dodge Neon : 12.446 @ 112.670
Aaron Homiak, Engine: Stock 2004 SRT-4, Turbos: Stock SRT-4 Tires: 205 Hankook's


1998 Dodge Neon R/T: 12.500 @ 110.830
DRIVER X, Engine: 2.0L DOHC, Turbos: stock SRT4 Tires: 185 65 17 YOKOHAMA


2004 Dodge Neon SE: 12.682 @ 106.180
Erick Steinmaier, Engine: 2.0 Sohc, Turbos: Mitsubishi Super 16g Tires: Kumho Victoracer V710


1998 Dodge Neon R/T: 12.701 @ 112.220
Aaron, Engine: Stock 2.0, Turbos: Stock SRT-4 turbofold Tires: Stock 185/65/14


1995 Dodge Neon ls: 12.769 @ 101.810
Chico SOHC, Engine: 2.0 SOHC, Turbos: TD05 16G (Hahnrace craft) Tires: BF Goodrich drag radials


1998 Dodge Neon R/T: 12.810 @ 107.810
Kyle, Engine: 2.4 (05 SRT-4 SWAP), Turbos: Stock TDO4 Tires: 22x8x15 M+H Slicks


1998 Dodge Neon R/T: 12.944 @ 101.510
Keith Koch, Engine: 2.4, Tires: 22x8 slicks



©2014 DragTimes - Disclaimer