Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

[FRONT + REAR KIT] 4 PERFORMANCE DRILLED SLOTTED BRAKE ROTORS AND 8 CERAMIC PADS for Sale


Parts Search:
If you like this part use the Google +1 button:


[FRONT + REAR KIT] 4 PERFORMANCE DRILLED SLOTTED BRAKE ROTORS AND 8 CERAMIC PADS

Price: $126

This item has been shown 13948 times.

Click HERE for more information about this part.

Untitled Document Toll Free (877) 477-9320 FRONT and REAR BRAKE KIT

Includes:
- 2 Front and 2 Rear cross drilled and slotted rotors
- 1 Front and 1 Rear set of performance ceramic pads
-

Chrysler Sebring Coupe 1995 - 2000 (Will Not Fit Convertible or 4 Door) Dodge Avenger 1995 - 2000 Eagle Talon Non-Turbo 1995 - 1996 Eagle Talon 2WD Turbo 1995 - 1999 Mitsubishi Eclipse Non-Turbo 1/1994 - 1999 Mitsubishi Eclipse 2WD Turbo 1/1994 - 1999 Mitsubishi Galant Produced between Feb.1998 - 2001 4 Cylinder Models ONLY CROSS DRILLED AND SLOTTED ROTORS BY KINETIC RACING

Kinetic rotors are machined from the finest G3000 grade castings the ideal balance between tensile strength and hardness.

PERFORMANCE CERAMIC PADS

Kinetic Ceramic Pads offer superior resistance to fade without the noise and dust associated with metal pads.

CHAMFERED AND SLOTTED LIKE THE OE PAD THERMAL SCORCHED FOR FAST BREAK-IN More Stopping Power Than Other Leading Brands
FASTER STOPS!

Cross drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691 "The Effect of Rotor Cross-drilling on Brake Performance". That is why Corvette, Porsche, Mercedes and BMW vehicles come factory direct with drilled brake rotors, i.e. not dimpled or slotted. The fact is that the drill holes greatly improve convection heat transfer and the result is more pad bite. The report also states that "it is possible to have too many holes, in which case too much cooling air would be lost before reaching the hottest part of the rotor". Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking.

STOP ROTOR WARPING!

High rotor temperature can cause heat spots to form in the rotor, and this causes pulsating brakes. Cross drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping.

GENUINE KINETIC CERAMIC BRAKE PADS!

Most vehicles come with ceramic pads from the factory. Kinetic's pads are the perfect replacement for serious street performance. All pads are made using positive mold technology for quiet, consistent braking. Pads are chamfered and slotted like the OE, and come with dual layer rubber shims.

Brakemotive is one of the largest brake suppliers in North America, with over 100,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our performance rotor and ceramic pad kit is at or below the cost of equivalent plain rotors and pads from your neighborhood retail store.

Our engineering team uses advanced CAD (computer aided design) software to configure the drill holes and slots for optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the fitment information in this listing before you order. We never request a restocking fee if you do order the wrong parts.


Brakemotive has lightning fast shipping, in fact over 98% of our orders ship within one (1) business day from our 70,000 square foot mid-west warehouse. Fedex will deliver packages to your door including Saturday. Fedex shipping takes 1 to 4 days depending on your location. We always e-mail your tracking information (to your registered e-mail) as soon as it ships.


The Brakemotive team members are available to answer your questions Monday through Friday 8:30AM CST to 6:00PM CST and Saturday through Sunday from 9:30AM CST to 4:30PM CST. If you can't find the parts for your vehicle, just give us a call. Toll Free (877) 477 9320 Brakemotive warrants to the original purchaser of this product, that this product will be free from defects in materials and workmanship for a period of six months (6 months) from the date of purchase or for 6,000 miles of use of the brake rotor or brake pads, whichever occurs first. Warranty does not cover normal wear and tear or damage caused by negligence, lack of maintenance, abnormal operation, track racing, off-road use, or improper installation. If a defect in workmanship or materials is found in a product that has been properly installed, in the type of vehicle these parts are cataloged for and such product has been returned to Brakemotive within such six months from date of purchase, the product will be exchanged. The customer is responsible for freight charges in regards to warranties. The warranty is non-transferable.

You are required to receive a RMA (Return Merchandise Authorization) number and return instruction from us before you return any item. Any return without a RMA number could be refused. Customers are responsible to return the defective item to Brakemotive for all warranty claims. Brakemotive will be responsible for freight for defective parts that are inspected by us and are determined to be defective per our published policy. No additional fees for installation or any other cost will be reimbursed with warranty claim. Only one warranty claim is allowed per customer. Brakemotive neither makes nor implies any other warranty as to suitability for purpose other than expressly warranted here and is not liable for any form of consequential damage losses or cost. All parts which are returned for a reason other than warranty are subject to a 15% restocking charge.

Shipping is FREE to the 48 contiguous states. There will be a $240.00 (USD) shipping cost for shipments going to Hawaii, Alaska and Puerto Rico. Shipping cost to Canada will be $115.00 (USD); this cost includes all taxes, and brokerage fees. For shipments to Illinois addresses, we are required to collect 8.75% sales tax. We cannot ship to PO boxes, if you place and order with us and the address on your account is to a PO Box the parts will not ship until we receive a physical address from you. We apologize, but we are unable to ship to APO addresses.

We prefer PayPal and accept all major credit cards.

Are the drilled holes and slots directional?

Yes, the rotors are machined based on their orientation on the vehicle. Driver's side (left) and passenger's side(right) have unique patterns so the slot trails toward the back of the vehicle.

CLICK HERE for guide.

How many pads come in a "set"?

On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Please note that some applications such as Audi and Corvette, among others, have a unique number of pads based on their caliper design, e.g. a Corvette Z06 set is 12 brake pads for the front and 8 brake pads for the rear. The important thing to understand is that a "kit" refers to all the parts for the application specified, I.e. front is two complete front wheels; front and rear is four complete front and rear wheels.

Are any modifications necessary to make these rotors fit my vehicle?

No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation.

Is the brake rotor picture the same as the rotor I will receive?

The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. The purpose of the image is for visual representation of a typical patter of the machined drill holes and slots as well as the silver zinc surface finish.

Will I get tracking information?

Yes, tracking information is automatically sent to your email address when the items have been shipped. After payment has cleared, handling time is one (1) business day. So, you will typically receive the e-mail from FedEx within 24 hours of the order being shipped. Please check your junk mail box for the Fedex tracking information as it sometimes ends up there.

How do I know if I have Solid Rotors or Vented Rotors?

CLICK HERE for guide.

What causes rotor warping?

CLICK HERE for guide.

Drilled vs slotted rotors, what is better?

CLICK HERE for guide.

Metallic vs Ceramic Brake Pads.

CLICK HERE for guide.

Jeep Grand Cherokee - Do I have Akebono or ATE/Teves front calipers?

CLICK HERE for guide.

Toyota Trucks - Do I have ST3WE or 13WL Calipers?

CLICK HERE for guide.


Follow DragTimes on Twitter
Share |


Similar 1/4 mile timeslips to browse:

2001 Dragster Front Engine : 5.879 @ 243.185
Brendan Murry,


2001 Dragster Front Engine : 5.879 @ 243.900
Brendan murry, Engine: Chevrolet, Supercharger: 6-71 littelfield Tires: M&H


2006 Dragster Front Engine trouble maker a/fd: 6.749 @ 201.160
kevin sine, Supercharger: littlefield 1071


1948 Dragster Front Engine Fuel Altered Fiat Topolino: 6.885 @ 129.720
Michael Tabacco, Engine: Mopar hemi 511ci, Supercharger: 1471 Tires: Hoosier 34.5x17x16


2006 Dragster Front Engine : 7.024 @ 196.930
Pat Hine, Engine: Chevy, Supercharger: 6-71


2005 Dragster Front Engine A/ND: 7.040 @ 191.830
Stu Sandhaus,


1969 Dragster Front Engine : 7.267 @ 182.110
Jed Dubach, Engine: injected small block chevy, Tires: goodyear


2004 Dragster Front Engine 23T Altered 115: 7.344 @ 185.070
Marc Sorger, Engine: 408 Big Block Chevy, Supercharger: 671 GMC Tires: Hoosier34.5X17X16


1970 Dragster Front Engine FRONT ENGINE NOSTALG: 7.547 @ 176.050
BOOM BOOM LEONARD, Engine: 377 CU. IN. SMALL BLOCK CHEVY, Tires: GOOD YEAR


1968 Dragster Front Engine Gilmore chassis/Hanna body: 7.570 @ 185.740
Paul Broughton, Engine: Chrysler 354, Supercharger: 6-71 Tires: Goodyear rear/Avon front


2000 Dragster Front Engine : 7.630 @ 170.020
Tammy Fargo, Engine: 370 SBC Iron block, Supercharger: 671unstripped Tires: 33x12x15 Goodyear


1923 Dragster Front Engine 23T-Altered: 8.130 @ 163.000
Doug Hrushka, Engine: 434ci. SBC, Tires: 14x32


1967 Dragster Front Engine slingshot: 8.182 @ 167.920
Bob Hawkins, Engine: Small block Chevy, Tires: Hoosier slicks and front runners


1933 Dragster Front Engine WILLY'S: 8.580 @ 151.000
Steve Duber, Engine: Cheverolet, Supercharger: BDS 871


1932 Dragster Front Engine altered: 8.590 @ 152.090
ray, Engine: 540,


1997 Dragster Front Engine Suncoast 23T Altered: 8.700 @ 149.250
JR Van Osten, Engine: 460 CID Chevy, Tires: Goodyears


1967 Dragster Front Engine jim davis: 8.870 @ 152.000
john stanovich, Engine: 360 sbc, Tires: hoosier 33x12x15 rear, 17x2.25 front


1968 Dragster Front Engine : 9.040 @ 148.220
Larry Hunter, Engine: 383 Chrysler, Tires: 13


1968 Dragster Front Engine : 9.590 @ 140.000
Samuel Scott IV, Engine: Chevy 350, Supercharger: N/A Tires: Hoosier


1988 Porsche 911 Carrera Turbo: 10.760 @ 135.440
JR, Engine: Porsche 3.2, Supercharger: n/a Turbos: Single Tires: Michelins



©2014 DragTimes - Disclaimer